Board Settings
This tool optimizes by length only — the board type is for labeling your material groups.
Cut List
Enter the pieces you need to cut. Lengths accept decimals (24.75) or fractions (24 3/4).
| Qty | Length (in) | Label | |
|---|---|---|---|
Sheet Settings
Pieces can rotate — the optimizer tries both orientations to minimize waste.
Cut List
Enter the pieces you need to cut. Dimensions accept decimals (24.75) or fractions (24 3/4).
| Qty | Width (in) | Length (in) | Label | |
|---|---|---|---|---|
